The methods for increasing production capacity of square swing screens can be summarized as follows:

1、 Optimize the feeding mode:

Ensure uniform feeding and avoid uneven distribution of materials on the screen surface. Uniformity can be maintained by setting up a distributor at the feed inlet or manually feeding.

Control the feeding amount. Excessive feeding can cause the screening material to be too thick, resulting in excessive production and clogging of the screen mesh, which in turn reduces production.

2、 Install and debug the screening device:

Set up an automatic screening device to reduce the possibility of clogged holes on the screening surface and improve screening efficiency.

Clean the sieve holes to ensure that the mesh smoothness remains above 80%, which helps materials pass through the sieve holes and improves screening efficiency.

3、 Improve the aperture ratio of the sieve:

For situations with larger sieve holes, using metal woven mesh or large hole punched plates to increase the opening rate of the sieve holes can improve the screening effect and increase the yield of the sieve holes.

However, it should be noted that increasing the aperture ratio of the sieve may affect the screening accuracy, so a balance needs to be made according to actual needs.

4、 Adjust the tilt angle:

According to the material characteristics and screening requirements, adjust the tilt angle of the screening box appropriately to optimize the movement of materials on the screening surface and improve screening efficiency.

For example, when there are fewer impurities in the material, the tilt angle can be appropriately increased to accelerate the movement of the material on the screen surface and increase the yield.

5、 Equipment maintenance and replacement:

Regularly check the wear of the screen mesh and replace severely worn screens in a timely manner to maintain the screening effect.

Check and clean the rubber ball for wear and replace it if necessary to maintain sufficient self-cleaning ability of the screen surface.

6、 Adjust the position of the sieve and the discharge port:

Adjust the position of the sieve and the height of the discharge port according to the screening material and requirements, so that the machine achieves the best screening effect.

7、 Ensure stable operation of the equipment:

Ensure that the supporting spring is evenly stressed and the vibrating screen is supplied uniformly.

Adjust the tilt angle to the optimal 4-5 ° to ensure optimal screening efficiency.

8、 Model selection:

Fully understand the required screening materials and production requirements, choose the correct model to ensure that the equipment can meet production needs.

By comprehensively applying the above methods, the production capacity of the square swing screen can be effectively improved while maintaining high screening accuracy and efficiency. It should be noted that different materials and screening requirements may require different adjustment and optimization methods, so flexible adjustments need to be made according to specific situations in practical applications.